Numeric sensor [NumericSensorElementName] going high (upper critical) has
asserted.
This message is for the use case when an implementation has detected an
Upper Critical sensor going high has asserted.
May also be shown as
800109020701ffff or 0x800109020701ffff
Alert Category
Critical - Voltage
CIM Information
Prefix:PLAT
and ID:0494
Automatically Notify Support
Yes
User Response
If the specified sensor is Planar 3.3V or Planar 5V, (Trained technician only) replace the system board.
If the specified sensor is Planar 12V, complete the following steps until the problem is solved:
- Check power supply n LED.
- Remove the failing power supply.
- (Trained technician only) Replace the system board. (n = power supply number)