.[W.3808003] Unable to retrieve the system configuration from the IMM.
Error Retrieving System Configuration from IMM
User Response
Complete the following steps:
- Use F1 Setup, Verify Settings and Save Settings to recover settings.
- Reset the IMM from the FPC.
- Use FPC to remove AUX power from the node. This will reboot the entire node.
- Check IBM support site for an applicable service bulletin or firmware update that applies to this error.
- Reflash IMM Firmware.
- Remove and re-install CMOS battery for 30 seconds to clear CMOS contents.
- Trained Service technician only) Replace the system board.