The following configuration programs come with the server:
Setup utility
The Setup utility is part of the UEFI firmware. Use it to perform configuration tasks such as changing interrupt request (IRQ) settings, changing the startup-device sequence, setting the date and time, and setting passwords. For information about using this program, see Using the Setup utility.
Boot Manager program
The Boot Manager is part of the UEFI firmware. Use it to override the startup sequence that is set in the Setup utility and temporarily assign a device to be first in the startup sequence. For more information about using this program, see Using the Boot Manager.
IBM ServerGuide Setup and Installation CD
The ServerGuide program provides software-setup tools and installation tools that are designed for the server. Use this CD during the installation of the server to configure basic hardware features, such as an integrated SAS/SATA controller with RAID capabilities, and to simplify the installation of your operating system. For information about using this CD, see Using the ServerGuide Setup and Installation CD.
Integrated management module
Use the integrated management module II (IMM2) for configuration, to update the firmware and sensor data record/field replaceable unit (SDR/FRU) data, and to remotely manage a network. For information about using the IMM, see Using the integrated management module and the Integrated Management Module II User's Guide at the User's Guide for Integrated Management Module II website.
VMware ESXi embedded hypervisor
An optional USB flash device with VMware ESXi embedded hypervisor software is available for purchase. Hypervisor is virtualization software that enables multiple operating systems to run on a host system at the same time. The USB embedded hypervisor flash device can be installed in USB connectors 3 and 4 on the system board. For more information about using the embedded hypervisor, see Using the embedded hypervisor.
Remote presence capability and blue-screen capture
Ethernet controller configuration
For information about configuring the Ethernet controller, see Configuring the Ethernet controller.
Features on Demand software Ethernet software
The server provides Features on Demand software Ethernet support. You can purchase a Features on Demand software upgrade key for Fibre Channel over Ethernet (FCoE) and iSCSI storage protocols. For more information, see Enabling Features on Demand Ethernet software.
Features on Demand software RAID software
The server provides Features on Demand software RAID support. You can purchase a Features on Demand software upgrade key for RAID. For more information, see Enabling Features on Demand RAID software.
IBM Advanced Settings Utility (ASU) program
Use this program as an alternative to the Setup utility for modifying UEFI settings and IMM settings. Use the ASU program online or out of band to modify UEFI settings from the command line without the need to restart the server to run the Setup utility. For more information about using this program, see IBM Advanced Settings Utility program.
Configuring RAID arrays
For information about configuring RAID arrays, see Configuring RAID arrays.
Server configuration | RAID array configuration (before operating system is installed) | RAID array management (after operating system is installed) |
---|---|---|
ServeRAID-H1110 adapter | LSI Utility (Setup utility, press Ctrl+C), ServerGuide, Human Interface Infrastructure (HII) | MegaRAID Storage Manager (MSM), SAS2IRCU (Command Line) Utility for Storage Management |
ServeRAID-M1115 adapter | MegaRAID BIOS Configuration Utility (press Ctrl+H to start), pre-boot CLI (press Ctrl+P to start), ServerGuide, HII | MegaRAID Storage Manager (MSM), MegaCLI (Command Line Interface), and IBM Director |
ServeRAID-C100 | HII | MegaRAID Storage Manager (MSM), MegaCLI, and IBM Director |