Use this information to solve hypervisor problems.
The hypervisor's
symptoms and actions table with one level of row and column headers.
- Follow the suggested actions in the order in which they are listed
in the Action column until the problem is solved.
- If an action step is preceded by "(Trained technician only)," that step must be performed only by a trained technician.
- Go to the IBM support website at the IBM support portal to check for technical information, hints, tips,
and new device drivers or to submit a request for information.
|
Symptom |
Action |
If an optional embedded hypervisor flash device
is not listed in the expected boot order, does not appear in the list
of boot devices, or a similar problem has occurred. |
- Make sure that the optional embedded hypervisor flash device is
selected on the boot manager <F12> Select Boot Device at startup.
- Make sure that the embedded hypervisor flash device is seated
in the connector correctly (see Removing the USB flash drive and Installing the USB flash drive).
- See the documentation that comes with the optional embedded hypervisor
flash device for setup and configuration information.
- Make sure that other software works on the server.
|