Replacing the filler on to the GPU tray

Use this information to install the filler on to the GPU tray.

To install the filler on to the GPU tray, complete the following steps:

  1. Read the safety information that begins on Safety and Installation guidelines.
  2. Turn off the compute node and peripheral devices and disconnect the power cords and all external cables.
  3. Remove the cover (see Removing the compute node cover).
  4. Align the filler with the bracket on the middle of the GPU tray; then, lower the filler into the GPU tray. Press the filler down until it is securely seated.
    Figure 1. Filler installation
    Filler installation
  5. Reinstall the cover (see Installing the compute node cover).
  6. Slide the compute node into the rack.
  7. Reconnect the power cords and any cables that you removed.
  8. Turn on the peripheral devices and the compute node.