Replacing the PCI riser filler

Use this information to install the PCI riser filler.

1. Read the safety information that begins on Safety and Installation guidelines.
2. Turn off the compute node and peripheral devices and disconnect the power cords and all external cables.
3. Remove the cover (see Removing the compute node cover).
4. Align the PCI riser filler pin with the baffle pin hole on the right side of the chassis; then, lower the PCI riser filler into the compute node. Press the PCI riser filler down until it is securely seated.
   Figure 1. PCI riser filler installation
   
   
5. Reinstall the cover (see Installing the compute node cover).
6. Slide the compute node into the rack.
7. Reconnect the power cords and any cables that you removed.
8. Turn on the peripheral devices and the compute node.