Installing the operator information panel

Use this information to install the operator information panel.

To install the operator information panel, complete the following steps.

1. Position the operator information panel on the front of the compute node.
   Figure 1. Position the operator information panel
   
   
2. Press the operator information panel securely against the compute node.
   Figure 2. Installation of an operator information panel
   
   
3. Install the connector of the operator information panel on the system board.
   Figure 3. Installation of the connector of an operator information panel
   
   
4. Install the screw of the operator information panel.
   Figure 4. Screw installation