Removing a RAID adapter battery holder

Use this information to remove a RAID adapter battery holder.

If a RAID adapter battery is installed remotely near the fan cage and you need to replace it, complete the following steps:

  1. Read the safety information that begins on Safety and Installation guidelines.
  2. Turn off the server and peripheral devices and disconnect all power cords; then, remove the cover (see Removing the compute node cover).
  3. Remove the remotely installed RAID adapter battery (see Remove the remotely installed RAID adapter battery section).
  4. Lift the battery holder up to remove the battery holder from the system tray.
    Figure 1. RAID adapter battery holder removal

If you are instructed to return the RAID adapter battery holder, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.

Parent topic: Removing and replacing structural parts