Use this information to remove the front handle.
Before you remove the front handle, complete the following
steps:
- Read Safety and Installation guidelines.
- If the compute node is installed in an IBM NeXtScale n1200 Enclosure, remove it (see Removing a compute node from a chassis for instructions).
- Carefully lay the compute node on a flat, static-protective surface
with the cover side down, orienting the compute node with the bezel
pointing toward you.
To remove the front handle, complete the following
steps.
Figure 1. Removal of the front handle
- Locate the screw that attaches the handle to the compute
node.
- Using a Phillips screwdriver, remove the screw from the
front handle and save the screw in a safe place. Use the same screw
when you install a front handle.
If you are instructed to return the front handle, follow
all packaging instructions, and use any packaging materials for shipping
that are supplied to you.