The fan power control has LEDs, controls, and connectors that you can use to
obtain status information and restart the fan power control.
Figure 1. Fan power control with call outs for the LEDs, controls, and connectors
The
fan power control has the following LEDs, controls, and connectors:
- Power-on LED
- When this LED is lit (green), it
indicates that the fan power control has power.
- Heartbeat LED
- When this LED is lit (green), it
indicates that the fan power control is actively controlling the chassis.
- Locator LED
- When this LED is lit (blue), it indicates
the chassis location in a rack.
- Check log LED
- When this LED is lit (yellow),
it indicates that a system error has occurred. Check the event log
for additional information.
- Reset button
- Press the button for 1 to 4 seconds, FPC reboots.
Press over 4 seconds, FPC reboots
and loads to the default settings.
- Ethernet port activity (RJ-45) LED
- When this
LED is flashing (green), it indicates that there is activity through
the remote management and console (Ethernet) port over the management
network.
- Ethernet port link (RJ-45) LED
- When this LED
is lit (green), it indicates that there is an active connection through
the remote management and console (Ethernet) port to the management
network.
- Remote management and console (Ethernet) connector
- The remote management and console connector (RJ-45) is the management
network connector for all chassis components. This 10/100 base T Ethernet
connector is usually connected to the management network through a
top-of-rack switch.