202-901-000 : MemStr Test Failed

MemStr Test Failed

Severity

Error

Serviceable

Yes

Recoverable

No

Automatically Notify Support

No

User Response

Complete the following steps:
  1. Execute the standard DSA memory diagnostics to validate all memory.
  2. Make sure that the DSA Diagnostic code is at the latest level.
  3. Turn off the system and disconnect it from power.
  4. Reseat the memory cards and DIMMs.
  5. Reconnect the system to power and turn the system on.
  6. Run the test again.
  7. Execute the standard DSA memory diagnostics to validate all memory.
  8. If the failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.

Related Links