Sensor [SensorElementName] has transitioned from normal to non-critical state. (TPM Phy Pres Set)
This message is for the use case when an implementation has detected a
Sensor transitioned to non-critical from normal.
May also be shown as
800701142201ffff or 0x800701142201ffff
Alert Category
Warning - Other
CIM Information
Prefix:PLAT
and ID:0520
Automatically Notify Support
No
User Response
- Complete the administrative tasks that require the TPM physical presence switch to be in the ON position.
- Restore the physical presence switch to the OFF position.
- Reboot the system.
- (Trained technician only) If the error continues, replace the planar.