[PhysicalMemoryElementName] Disabled on Subsystem [MemoryElementName]. (DIMM 14)
This message is for the use case when an implementation has detected that
Memory has been Disabled.
May also be shown as
806f040c200effff or 0x806f040c200effff
Alert Category
System - Other
CIM Information
Prefix:PLAT
and ID:0131
Automatically Notify Support
No
User Response
- Make sure the DIMM is installed correctly.
- If the DIMM was disabled because of a memory fault (memory uncorrectable error or memory logging
limit reached), follow the suggested actions for that error event and restart the server.
- Check the IBM support website for an applicable retain tip or firmware update that applies to this memory
event. If no memory fault is recorded in the logs and no DIMM connector error LED is lit, you can re-enable
the DIMM through the Setup utility or the Advanced Settings Utility (ASU).