[W.3808003]
Unable to retrieve the system configuration from the IMM. Error Retrieving System Configuration from IMM
User Response
Complete the following steps:
- Use the Setup Utility to verify and save the settings (which will recover the settings).
- Reset the IMM from the CMM.
- Use CMM to remove auxilliary power from the compute node. This will reboot the compute node.
- Check the IBM support site for an applicable service bulletin or firmware update that applies to this error.
- Update the IMM Firmware.
- Use CMOS clear jumper to clear CMOS
- (Trained service technician only) Replace the system board.