Use this information to log on to the web interface.
To log on to the IMM web interface, complete the following
steps:
-
On a system that is connected to the server, open a web
browser. In the or field,
type the IP address or host name of the IMM to which you want to connect.
Note: If you are logging on to the IMM for the first time after
installation, the IMM defaults to DHCP. If a DHCP host is not available,
the IMM assigns a static IP address of 192.168.70.125. The IMM network
access tag provides the default host name of the IMM and does not
require you to start the server.
-
On the Login page, type the user name and password. If
you are using the IMM for the first time, you can obtain the user
name and password from your system administrator. All login attempts
are documented in the system-event log.
Note: The IMM is
set initially with a user name of USERID and password of PASSW0RD
(with a zero, not a the letter O). You have read/write access. You
must change the default password the first time you log on.
-
Click to start the session. The System Status and Health
page provides a quick view of the system status.
Note: If you boot to the operating system while in the IMM
GUI and the message Booting OS or in unsupported OS
is displayed
under , disable Windows 2008 firewall or
type the following command in the Windows 2008 console. This might
also affect blue-screen capture features.
netsh firewall
set icmpsetting type=8 mode=ENABLE
By default, the
icmp packet is blocked by Windows firewall. The IMM GUI will then
change to OS booted
status after you change the setting as
indicated above in both the Web and CLI interfaces.