Watchdog [arg1] Screen Capture Occurred . ()
This message is for the use case where an operating system error has occurred and the screen was captured.
May also be shown as
4000001c00000000 or 0x4000001c00000000
Alert Category
System - other
CIM Information
Prefix:IMM
and ID:0028
Automatically Notify Support
No
User Response
If there was no operating-system error, complete the following steps until the problem is solved:
- Reconfigure the watchdog timer to a higher value.
- Make sure that the IMM Ethernet-over-USB interface is enabled.
- Reinstall the RNDIS or cdc_ether device driver for the operating system.
- Disable the watchdog.
If there was an operating-system error, check the integrity of the installed operating system.