Numeric sensor [NumericSensorElementName] going high (upper non-critical) has
asserted. (Ambient Temp)
This message is for the use case when an implementation has detected an
Upper Non-critical sensor going high has asserted.
May also be shown as
800107013701ffff or 0x800107013701ffff
Alert Category
Warning - Temperature
CIM Information
Prefix:PLAT
and ID:0490
Automatically Notify Support
No
User Response
- Make sure that the water loop is operating, the relevant water tubes are in place and correctly installed, and that the server cover is installed and completely closed.
- Check the ambient temperature. You must be operating within the specifications (see Server Features and specifications for more information).
- Make sure that the heat sink for microprocessor n.
- (Trained technician only) Replace system board.