The [StorageVolumeElementName] has been removed from unit [PhysicalPackageElementName]. (SDHV Drive 7)
This message is for the use case when an implementation has detected a
Drive has been Removed.
May also be shown as
816f000d0416ffff or 0x816f000d0416ffff
Alert Category
Critical - Hard Disk drive
CIM Information
Prefix:PLAT
and ID:0163
Automatically Notify Support
No
User Response
- Reseat hard disk drive n.(n = hard disk drive number). Wait 1 minute or more before reinstalling the drive.
- Make sure that the disk firmware and RAID controller and backplane firmware are at the latest level.
- Check the SAS cable.
- Replace the hard disk drive.