This section details the fan power control (FPC) error codes.
Fan power control (FPC) diagnostic error codes can be generated when the server starts up or while the server is running. Fan power control (FPC) codes are logged in the FPC event log in the server.
For each event code, the following fields are displayed:
Severity | Description |
---|---|
Informational | An informational message is something that was recorded for audit purposes, usually a user action or a change of states that is normal behavior. |
Normal | An normal message is for audit purposes only, usually stand for system normal operating status or user action. |
Warning | A warning is not as severe as an error, but if possible, the condition should be corrected before it becomes an error. It might also be a condition that requires additional monitoring or maintenance. |
Non-Recoverable | An error typically indicates a component failure or critical condition where the component or system environment may not be able to recover without service action or local determination. |
Critical | An Critical typically indicates a failure or critical condition that impairs service or an expected function. |
Perform the steps listed in this section in the order shown until the problem is solved. After you perform all of the actions that are described in this field, if you cannot solve the problem, contact Lenovo support.
The following is the list of the fan power control (FPC) error codes and suggested actions to correct the detected problems.