Use this information to remove a RAID adapter battery holder.
Before you remove a RAID adapter battery holder, complete
the following steps:
- Read Safety and Installation guidelines.
- If the compute node is installed in a NeXtScale n1200 Enclosure, remove it (see Removing a compute node from a chassis for instructions).
- Carefully lay the compute node on a flat, static-protective surface, orienting the compute node with the bezel pointing toward you.
To remove a RAID adapter battery holder, complete the following steps:
-
Use a tool such as a flat screwdriver to push the latch.
Then release the battery holder.
Figure 1. RAID adapter battery holder released
-
Lift the battery holder up to remove the battery holder
from the air baffle.
Figure 2. RAID adapter battery holder removal
If you are instructed to return the RAID adapter battery holder, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.