Removing and replacing Tier 1 CRUs

Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request, you will be charged for the installation.

The illustrations in this document might differ slightly from your hardware.

Removing a RAID adapter battery
Use this information to remove a remotely installed RAID adapter battery.
Replacing a RAID adapter battery
Use this information to replace a RAID adapter battery.
Removing a RAID adapter battery holder
Use this information to remove a RAID adapter battery holder.
Replacing a RAID adapter battery holder
Use this information to install a RAID adapter battery holder.
Removing the optional front 2.5-inch hot-swap hard disk drive cage
Use this information to remove the optional front 2.5-inch hot-swap hard disk drive cage.
Installing the optional front 2.5-inch hot-swap hard disk drive cage
Use this information to install the optional front 2.5-inch hot-swap hard disk drive cage.
Removing the IMM interposer assembly
Use this information to remove the IMM interposer assembly.
Replacing the IMM interposer assembly
Use this information to install the IMM interposer assembly.
Removing the power paddle card from the GPU tray
Use this information to remove the paddle card from the GPU tray.
Replacing the power paddle card on to the GPU tray
Use this information to install the power paddle card on to the GPU tray.
Removing the system battery
Use this information to remove the CMOS battery.
Replacing the system battery
Removing a memory module
Use this information to remove a memory module.
Installing a memory module
The following notes describe the types of DIMMs that the compute node supports and other information that you must consider when you install DIMMs.
Removing the hard disk drive backplate
Use this information to remove the hard disk drive backplate.
Installing the hard disk drive backplate
Use this information to install the hard disk drive backplate.
Removing and installing drives
Use this information to remove and install drives.
Removing a ML2 riser-cage assembly
Replacing a ML2 riser-cage assembly
Removing a PCI riser-cage assembly
Replacing a PCI riser-cage assembly
Removing a PCI riser-cage assembly from the GPU tray
Replacing a PCI riser-cage assembly to the GPU tray
Removing a PCI riser-cage assembly from the 2U GPU tray
Replacing a PCI riser-cage assembly to the 2U GPU tray
Removing an adapter/GPU adapter
Use this information to remove an adapter/GPU adapter.
Replacing an adapter/GPU adapter
The following notes describe the types of adapters that the server supports and other information that you must consider when you install an adapter.
Removing the SD adapter
Use this information to remove the SD adapter.
Replacing the SD adapter
Use this information to replace a SD adapter.
Removing a ServeRAID SAS/SATA controller
Use this information to remove a ServeRAID SAS/SATA controller.
Replacing a ServeRAID SAS/SATA controller
Use this information to replace a ServeRAID SAS/SATA controller.
Removing the USB flash drive
Use this information to remove the USB flash drive.
Installing the USB flash drive
Use this information to install the USB flash drive.

Parent topic: Removing and replacing components